We are a manufacturer. Jiangxi Huaming Wisdom Display Technology runs its own TFT LCD module factory in Shanggao, Jiangxi, built in 2024 with RMB 100 million invested. Glass cutting, polarizer attaching, COG/FOG bonding, backlight assembly and optical bonding all take place in-house, in 4,000 m² of Class 1,000 cleanroom.

We belong to a display group that has made LCDs since 2011, with headquarters in Shenzhen and a monochrome LCD factory in Gao’an. You are welcome to visit the factory, or ask us for photos and line lists for a remote audit. See our history.

Our factory is certified to IATF 16949:2016 (issued May 2026 by Zhong An FCAV International), ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and IECQ QC 080000:2017. All modules comply with RoHS, and third-party test reports are available on request.

We send scanned certificates with any quotation. We do not hold medical device certification such as ISO 13485; device-level approvals remain with the equipment manufacturer. View our certificates.

Our range runs from 0.96″ to 10.1″ in TN, IPS and MVA panels, including round, square, bar-type and 4:3 formats, plus in-cell touch models. Interfaces include SPI, QSPI, MCU, RGB (16/18/24-bit), MIPI and LVDS.

Our standard catalog covers more than 50 models, and most of them can also be supplied with a different interface, cover glass or FPC to suit your controller and housing. Browse our LCD modules.

Yes — over 60% of the modules we ship are customized. We adapt outline, glass size, FPC length and shape, pin definition, connector position, backlight brightness and interface. We also supply custom cover glass with printed borders, logos and button legends, optically bonded to the display, with capacitive touch where needed.

Send us your drawing, main chip and target specification, and our engineers will recommend whether a standard model with small changes or a fully custom design is the better route. See our custom solutions.

It depends on whether the model is standard or customized, and on the cover glass and touch requirements. Send us your model or drawing with your estimated annual quantity, and we will confirm MOQ, sample lead time and mass-production lead time in our quotation.

With 1 million modules of monthly capacity and a fully fitted expansion floor, we can support both pilot runs and steady volume orders. Request a quotation.

Every module is 100% lighting-tested before shipment. Automatic particle inspection and three-in-one automatic dispensing run inside the production line, so defects are caught in the process rather than at the end of it.

New designs are validated in our in-house reliability lab with high-temperature/high-humidity, high-temperature storage, thermal shock, constant temperature-humidity, salt spray and ESD testing before mass production, all under an IATF 16949 quality system. See our testing and engineering services.

Yes. Samples are built on the same automated lines we use for mass production, not on a separate prototype bench — so the module you test and approve is the module you receive in volume.

Sample cost and timing depend on whether the design is standard or custom; we confirm both in the quotation.

CE marking is declared for a finished product, not for a display module on its own. Because RoHS is one of the CE directives, our RoHS compliance documents and third-party test reports go directly into your CE technical file.

Our engineers also supply the component data you need for CE or vehicle E-mark approval. If your project requires specific EMC testing, tell us at the quotation stage.